Better Water for
a Better Life
Water Softener Maintenance Tips: Insights from a Pentair Water Softening Company in Campton Hills, Illinois
Water softeners serve to remove calcium and magnesium from their respective water supplies, rendering water “soft”. In most cases, these systems perform very well on their own over time. However, they still require some routine maintenance from time to time.
Are you interested in learning about water softener maintenance and all that it entails? This Pentair water softening company in Campton Hills, Illinois is going to discuss the key things you should know below.
Check Salt Regularly
For a water softener to operate smoothly, it must be filled with softener salt. The salt is integral to the ion-exchange process that enables the water softener to work its magic.
This is why the most important aspect of water softener maintenance is to check the salt regularly. How regularly should you be checking on it? We suggest doing so every week or so.
To check the salt in your water softener, you can simply lift the lid on the brine tank. There should be enough salt to cover water in its entirety. If you can see water, then it’s time to add more salt.
Clean the Brine Tank
Another important aspect of water softener maintenance is cleaning the brine tank. If you don’t clean it once or twice a year, it will start to become clogged, which will result in the water softener struggling to function altogether.
To clean the brine tank, you can start by disconnecting the water softener. Then, you can remove the brine tank and dump its contents in a rarely used area of your yard. You might even consider covering the contents with soil or gravel.
Next, remove the various parts of the brine tank and clean them individually. You can clean the inside of the tank with a power washer or brush. Then, add a quarter cup of bleach mixed with three gallons of water. Allow this to sit for 15 to 30 minutes as a means of sanitizing it. Finally, rinse the bleach out and manually dry the tank with a towel. It needs to be entirely dry before it’s reassembled. The tank’s salt plate should be cleaned as well. This can be done with water and dish detergent.
After everything has been cleaned, you can reconnect it to the water softener, add 5 gallons of water, add softener salt, and then run a regeneration cycle. After this, the water softener will be good to go once again.
Need some help cleaning your water softener brine tank? If so, you can always get in touch with a Pentair water softening company in Campton Hills, Illinois.
Swap Out the Resin Beads
Water softeners utilize resin beads as a means of facilitating the ion-exchange process. After some time, however, these resin beads wear out and lose their functionality. It’s at this point that they need to be replaced.
One thing to note here is that resin beads tend to last between 10 and 15 years. In other words, you won’t have to do this very often. However, if you notice that your water softener is no longer producing soft water, it’s probably time for those beads to go.
The resin bead replacement process isn’t the easiest thing for a homeowner to facilitate. When the time comes, you might want to reach out to a professional Pentair water softening company in Campton Hills, Illinois. They will have the tools and knowledge needed to get the job done right.
Looking for a Pentair Water Softening Company in Campton Hills, Illinois?
Are you ready to have your water softener maintained by the professionals? If so, and if you’re looking for the best Pentair water softening company in Campton Hills, Illinois, Johnson Water Conditioning is the company to call. Contact us today to schedule an appointment.